A dedicated circuit serves one appliance and nothing else: the wire, the breaker, and the receptacle are all sized to that single load. Air conditioners, EV chargers, electric ranges, dryers, and workshop equipment all require them.
Sharing a circuit with a big load is how breakers end up tripping and wiring ends up overheating. We run dedicated circuits sized to the equipment, permitted and inspected, with our own electricians.
What Needs a Dedicated Circuit
The usual suspects in a West Palm Beach home:
- Air conditioning — every outdoor unit and most air handlers.
- Mini-split systems — each outdoor unit.
- EV chargers — Level 2 chargers are a major continuous load.
- Electric ranges, ovens, and dryers.
- Pool pumps and pool heaters.
- Workshop equipment — table saws, compressors, welders.
- Whole-home dehumidifiers.
Sized to the Equipment, Not the Guess
A dedicated circuit starts at the equipment's nameplate: amperage, voltage, and whether the load is continuous. The wire gauge, breaker rating, and receptacle all follow from those numbers, per code.
Undersized wiring overheats; oversized breakers fail to protect. We do the calculation and install exactly what the equipment and the code require — and we label the panel so the circuit is easy to find later.
Running Wire in Real Houses
The electrical work is straightforward; the routing is the craft. In older east-side homes with plaster walls and tight attics, we plan the run to minimize openings. In newer west-side homes, we route through accessible attics and chases.
Either way, the circuit runs from the equipment back to the panel on its own breaker, with a properly rated disconnect where the equipment requires one. Permits are pulled where required.
Part of Every Major Install We Do
Because we install the equipment too — AC systems, mini-splits, EV chargers, generators — the dedicated circuit is built into the project, not bolted on afterward. Our electricians size the circuit, confirm the panel has the capacity, and handle the permit.
One company, one schedule, one written price covering both the equipment and the power feeding it.
Common questions
What is a dedicated circuit?
A circuit that serves exactly one appliance — its own breaker, its own wire run, sized to that load. Big appliances require them by code.
Can I run two appliances on one dedicated circuit?
No — that defeats the purpose. Each major appliance gets its own circuit so neither one overloads the wiring.
How long does it take to add a circuit?
Most single-circuit runs are completed in a day. Longer or more complex routing takes longer; you get a schedule before we start.
Does a new circuit need a permit?
Yes. New circuits require permits and inspections. We handle both.
Related services
Ready when you are.
For fastest service, call now. Prefer to book online? Send a request and we'll call you back to schedule.
(561) 786-1337